LB management
Display standard for room temperature control
ƛ
,
Ƽ
and YES or No appear in the display.
The parameters can be confirmed (
ƨ
button) or changed (– or + button) as described in the
Commissioning section.
After value changes, the device will start with the saved setpoint values.
Saving current time as switching time, quick programming
Switching times can also be saved without calling up the programming menu. The current time
is saved as the switching time for Mo-Fr and Sa-So.
Quick programming overwrites the existing ECO or comfort temperature in the first
memory area. The switching times from memory areas 2 and 3 are deactivated.
￭
Press and hold the
ƨ
button and additionally press the – button for the ECO temperature
or the + button for the comfort temperature for more than 1 second.
SAVE appears in the display. The current time is saved as the new switching time for the
ECO or comfort temperature.
Display: setpoint temperature, actual temperature or current time
After commissioning, the device indicates the setpoint temperature and switches off the display
after 2 minutes without any operation. Alternatively, the actual temperature or current time can
be displayed.
The display can also remain switched on continuously.
￭
Press the
ƨ
and
Ƙ
buttons simultaneously for longer than 10 seconds.
A countdown runs in the display. When "0" is reached, the actual temperature is shown in
the display.
The active temperature sensor is shown in the display when the actual temperature indic-
ation is selected.
ƻ
or
ƻ
and
ƺ
: The measured value is provided by the internal sensor.
ƺ
: The measured value is provided by the remote sensor connected to the insert.
￭
Press the
ƨ
and
Ƙ
buttons simultaneously again for more than 10 seconds.
A countdown runs in the display. When "0" is reached, the current time is displayed.
Use the same operating step to switch back to setpoint temperature display.
￭
Press the
ƨ
and
Ƨ
buttons simultaneously for longer than 10 seconds.
A countdown runs in the display. When "0" is reached, the display is switched on continu-
ously.
Use the same operating step to switch the display off again after 2 minutes. The display
briefly turns dark to indicate confirmation.
In setpoint or actual temperature display mode, the
ƨ
or
Ƨ
button can be pressed for more
than 1 second to display the current time as long as the button is actuated.
Resetting the cover to the default setting
￭
Press the
Ƨ
and
Ƙ
buttons simultaneously for 10 seconds.
A countdown runs in the display. The reset is performed with "0".
The default setting is restored. The year flashes in the display and the device must be re-
commissioned (see Commissioning section).
9
Information for electrically skilled persons
This device includes an integrated battery. At the end of its useful life, dispose of the
device together with the battery in accordance with the environmental regulations. Do
not throw device into household waste. Consult your local authorities about
environmentally friendly disposal. According to statutory provisions, the end consumer is
obligated to return the device.
8 / 10
32401503
19.05.2020
J0082401503
