Image 3: Switching DALI inserts in parallel
Parallel switched DALI inserts cannot be operated with motion or presence de-
tector covers.
Adjusting the minimum brightness and colour temperature limits to the luminaire
Precondition: Light is switched on.
￭
Press the button Test (3) for longer than 4 seconds, until the LED (2) turns
green.
The connected luminaire switches to the currently set minimum brightness.
If the button Test is not pressed for more than 30 seconds, the setting mode is
automatically exited, the settings are applied and the LED goes out.
￭
To change the minimum brightness, press and hold the button Test for longer
than one second.
The LED flashes green and the luminaire starts to become brighter with min-
imum brightness.
￭
Once the desired minimum brightness is reached, release the button Test.
The LED lights up green. The minimum brightness is saved.
￭
To set the coldest colour temperature, press the button Test for less than one
second.
Power DALI push-button controller TW
7 / 9
82598933
19.08.2022
J0082598933
