￭
Set run-on time. Turn adjuster (1) (see figure 1).
￭
Presetting the operating mode. Turn adjuster (3) (see figure 1).
With the automatic function with switch-off warning, the service life of the relay
contact may be reduced when fluorescent lamps or energy-saving lamps are
used. The set run-on time is prolonged by approx. 30 seconds.
4
Information for electrically skilled persons
DANGER!
Mortal danger of electric shock.
Disconnect the device. Cover up live parts.
4.1
Mounting and electrical connection
The automatic RMD can be used for a 3-conductor circuit (Figure 2) or a 4-conductor
circuit (Figure 3). The 4-conductor circuit has the advantage that an additional lumin-
aire can be switched separately.
Image 2: Connection diagram for 3-conductor circuit
Power unit for rail mounting, Pulse insert
5 / 10
82599523
15.08.2022
J0082599523
