6
ASSEMBLY
Place all parts from the box in a cleared area and position them on the floor in front of
you. Remove all packing materials and place them back in the box. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning
assembly and make sure you understand each step. If you are missing a part please call
our toll-free number for assistance: 1-866-567-4089.
WARNINGS:
•
Always use two or more strong people to assemble the trampoline. Failure to use two or
more strong people may allow the springs to strike back and hit someone, which could
cause serious injury or death.
•
Keep children and pets away from the trampoline during assembly.
•
Keep fingers away from the places where they can be pinched or trapped.
•
The frame pad must be installed before using the trampoline.
•
Do not attempt to assemble the trampoline if any parts are missing.
•
Adequate overhead clearance is essential. A minimum of 24’ (8 m) from ground level is recommended.
Provide clearance for wires, tree limbs, and other possible hazards.
•
Lateral clearance is essential. Place the trampoline away from walls, structures, fences and other play
areas. Maintain a clear space on all sides of the trampoline.
•
Place the trampoline on a level surface before use.
•
Use the trampoline in a well-lit area. Artificial illumination may be required for indoor or shady areas.
•
Secure the trampoline against unauthorized and unsupervised use.
•
Remove any obstructions from beneath the trampoline.
•
The owner and supervisors of the trampoline are responsible for making all users aware of practices
specified in the user instructions.
Step 1: Preparation
•
Place the Top Rail Tubes
(19, 20, 21), T-shaped Joints (4), Vertical Leg Tubes (5, 10) and V-shaped Tubes
(6) on a level surface, as shown in the picture below. This provides an overview of the parts and the way
they should be assembled.
21
20
19
10
5
4
6
084-0207-Cantire-8ft Trampoline Combo-GB-02.indd 6
11-11-9 ��4:11
