
10
Making Replacements and Adjustments
FlexBounce III
Configurations
FlexBounce VII Configurations
Softer
Soft Setting on all
FlexBounce connectors
Soft Setting on all FlexBounce
connectors
Medium Setting on every
other
connector
Medium Setting on every
other
connector
Soft / Medium / Medium Settings
(repeat pattern)
Medium Setting on every
connector
Medium Setting on every
connector
Firm Setting on every
other
connector
Medium / Firm / Firm Settings
(repeat pattern)
Firmer
Firm Setting on every connector
If you wish to change the firmness of your
rebounder, turn it upside down. Pull cord
tighter to different knot, according to chart.
How to Adjust FlexBounce™ Cords
Soft Setting
(factory setting)
Medium
Setting
Firm
Setting
FlexBounce
connector
FlexBounce VII
shown here
Expected Cord Life
Elastic cords are wear items that need
to be replaced from time to time. Their
life expectancy is determined by:
The way the trampoline is being used
(jumping for height vs. controlled,
fitness-style bouncing vs. jogging)
The user weight and height
Frequency of bouncing
The type of cords used (standard or
extra-firm)
We are often asked how long your
cords will last. The answer is, it de-
pends. Some of our customers use a
set for 9 months, while most will use a
set for many years. Similar to running
shoes or car tires, the more you use
them and the
harder
you use them, the
faster they need to be replaced.
Replacing Endurolast Cords
Replace your elastic cords with genuine JumpSport
®
parts whenever there is visible damage or when the cords
feel too soft.
1) Remove existing cord. Take the new cord and first secure each knot into the respective openings, as shown
at location 1 in the diagram, below.
2) Pull the loop end out and over the frame, securing it in the top slot, U-shaped slot, shown at location 2 in
the diagram, below.
3) Be sure the end of the cord loop is centered in the U-shaped slot so the cord tension is equal on both sides
of the mat connector.
TIP: If you have an adjustable FlexBounce system (see photo and diagram on page 11) and the cords are not
visibly damaged, try a firmer tension setting to improve performance and extend the life of your cords.
1
2
(300 and 500 Series)