STEP 5 :
FITTING THE ENCLOSURE TUBES
You will need the following parts to complete step 5:
8 x Top enclosure tubes
- Part H
8 x Bottom enclosure tubes
- Part I
8 x Self tapping screws
- Part L
You will also need a phillips-head screwdriver
(not
supplied)
.
Insert the thin end of one of the bottom enclosure
tubes into the open end of one of the top
enclosure tubes.
Align the hole in the bottom enclosure tube with
the slot in the top enclosure tube.
Screw one of the self tapping screws through the
slot in the top enclosure tube and into the hole in
the bottom enclosure tube using the phillips-head
screwdriver.
Top enclosure tube
Bottom enclosure tube
Self tapping screw and washer
Phillips-head screwdriver
23
