27
STEP 7 :
ATTACHING THE BOTTOM OF THE NET
You will need the following parts to complete step 7:
8 x Cords
- Part M
.
Tie the end of the cord around a V-Ring.
Push the end rope through a hole in the
bottom of the netting.
Important:
Keep the cord tight at all times.
Slot end of the cord through the middle of the next
V-Ring along.
Now slot the end back through the net and down
through the next V-Ring. Continue to do this until
you have used up nearly all the cord then tie this
end around a V-Ring.
Tie another cord to this V-Ring and continue until
all of the net is tied down.
From the underside of the trampoline, tie the
remaining elastic straps around the springs or
through the V-Rings.
You have completed step 7 and the trampoline is
fully assembled.
