JUMO LOGOSCREEN 500, Руководство по эксплуатации, Страница: 64 / 100

4 Configuration parameters
62
4.2.10 Configuration - Interface
4.2.11 Configuration - Fine calibration
Parameter Value/selection Description
Interface type Configuration
➔
Interface
➔
Interface type
RS232,
RS485
Selection of the serial inter-
face (extra code)
Protocol Configuration
➔
Interface
➔
Protocol
MODBUS ,
JBUS
Baud rate Configuration
➔
Interface
➔
Baud rate
9600 baud,
19200 baud,
38400 baud
Data format Configuration
➔
Interface
➔
Data format
8-1-none ,
8-1-odd,
8-1-even,
8-2-none
Instrument address Configuration
➔
Interface
➔
Instrument address
1 — 255
Minimum
response time Configuration
➔
Interface
➔
Min. response time
0 — 500ms
Parameter Value/selection Description
Calibration status Configuration
➔
Fine calibration
➔
Analog input 1 — 6
➔
Calibration
status
Off ,
On
A calibration (adjustment)
of the analog measure-
ments can be activated
here. The adjustment is
carried out using a linear
equation.
Actual start value Configuration
➔
Fine calibration
➔
Analog input 1 — 6
➔
Actual
start value
-99999 to 0 to +99999 Start value of the actual
line.
Only active when
calibration status = On.
Set start value Configuration
➔
Fine calibration
➔
Analog input 1 — 6
➔
Set start value
-99999 to 0 to +99999 Start value of the
set line.
Only active when
calibration status = On.
Actual end value Configuration
➔
Fine calibration
➔
Analog input 1 — 6
➔
Actual
end value
-99999 to 1000 to +99999 End value of the actual line.
Only active when
calibration status = On.
Set end value Configuration
➔
Fine calibration
➔
Analog input 1 — 6
➔
Set end value
-99999 to 1000 to +99999 End value of the
set line.
Only active when
calibration status = On.