DIMENSIONS / MOUNTING
The electronics are located in the front cover, which can be easily snapped on/off once the back cover is fixed onto the wall
( D = mounting holes) and wired.
Opening the enclosure
Press to release the latch A, till the enclosure can be opened. Use a screwdriver or a pen.
Closing the enclosure
Set the front cover into flute B, rotate it like C and press it onto the back cover till the latch A
snaps in.
Important
In order to protect the front cover and the electronics from typical
construction site pollution (such as painting of the walls) the front cover should be snapped on
only after the construction works are completed.
As the transmitter is generally mounted onto a conduit box, for accurate measurement results it
is important to tighten the conduit box for avoiding false air ingress (along the electrical tubes
inside the wall) into the enclosure.
B
C
A
D
Dimensions: 85 x 100 x 26 mm (WxHxD)
CONNECTION DIAGRAM
MOUNTING HOLES
907021/11-2-34-065
907021/11-3-34-066
907021/11-3-34-067
907021/11-2-34-005
907021/11-3-34-006
907021/11-3-34-007
