JUMO dTRANS T06 Ex, Руководство по эксплуатации

Страница: 26 / 124

5 Starting operation of the device
26
5 Starting operation of the device
5.1 Display and control elements
h
When the voltage supply is set up, a self-test begins during which the backlight display shows white pixels for 2 s and then
black pixels for 2 s. During this time, the LED lights up red and green simultaneously.
The self-test is followed by a language prompt and then the main measured value appears:
v
If an error message appears, see Chapter 13 "Error messages".
5.2 Setting the display after device is switched on
The main view appears on the screen in German per default.
Once a probe has been connected, the device displays a measured value of 24.0 °C and an output signal of 10.38 mA as an
example here.
Note
If something else is to be displayed after switch-on, this can be adjusted as follows:
v
Chapter 9.3.1 "Normal display"