Jumbuck CIRCA HS-A160, Инструкция по сборке и эксплуатации

Страница: 7 / 20

2. Turn gas cylinder
on
3. Spray or apply
soapy water on
gas connections
4. If leak is
present, bubbles
will appear
LEAK TESTING LEAK TESTING LEAK TESTING LEAK TESTING
Please check for gas leakage the first time you are
connecting the BBQ to the gas cylinder, and also
each time you are replacing the gas cylinder or
disconnecting/reconnecting any fittings. Inspect
the hose before each use.
To check for gas leakage, turn on the gas supply at
the gas cylinder. Caution – gas will flow from the
burner as soon as the cylinder valve is opened, as
this valve also controls the burner operation. Pour
soapy water solution over the cylinder connections.
Any gas leakage should result in bubbles appearing
immediately. If a gas leakage is detected, tighten
the connection and recheck for leaks. If the gas
leakage persists, turn off the gas supply and contact
your supplier or place of purchase. As an alternative,
you may use a gas leak detector, following the
manufacturer’s instructions, available at all major
BBQ retailers. This provides an easier way to check
for gas leaks. Do not use the appliance until the gas
leak has been rectified.
DO NOT USE NAKED FLAME FOR LOCATIN
DO NOT USE NAKED FLAME FOR LOCATIN DO NOT USE NAKED FLAME FOR LOCATIN DO NOT USE NAKED FLAME FOR LOCATING GAS G GAS G GAS G GAS
LEAKS. IF A LEAK PERSISTS, TURN OFF GAS
LEAKS. IF A LEAK PERSISTS, TURN OFF GAS LEAKS. IF A LEAK PERSISTS, TURN OFF GAS
LEAKS. IF A LEAK PERSISTS, TURN OFF GAS
CLYLINDER VALVE AND
CLYLINDER VALVE AND CLYLINDER VALVE AND CLYLINDER VALVE AND CALL AN AUTHORISED CALL AN AUTHORISED CALL AN AUTHORISED CALL AN AUTHORISED
PERSON
PERSON PERSON
PERSON
1. Add soap and water to spray bottle or
soapy water with brush