background image

2

IMPORTANT HEALTH & SAFETY INFORMATION

Please keep these instructions

   3.   

IF YOU SMELL GAS

 

 

DO NOT ATTEMPT TO OPERATE THE 

BARBECUE UNTIL THE CAUSE OF THE 

GAS SMELL HAS BEEN IDENTIFIED AND 

ELIMINATED

  

  Immediately isolate the gas supply by 

turning the gas off at the gas cylinder.

  

  Extinguish all naked flames.

  

  Do not operate any electrical devices close to 

the barbecue.

  

  Check for leaks as described on page 9 under 

Section 4: 

PRECAUTIONARY LEAK TEST

.

  

  Ensure that local area is well ventilated to 

remove any excess gas.

  

  If the gas smell continues the barbecue 

should not be operated under any 

circumstances and it is important to make 

immediate contact with the customer 

service centre.

   4.   

PRECAUTIONS

 

 

BEFORE FIRST TIME OPERATION AND 

AFTER EACH GAS CYLINDER EXCHANGE/

REFILL, ALL CONNECTIONS SHOULD BE 

CHECKED FOR GAS LEAKS

  

  Connections can be checked for leaks 

by using a soapy water solution as per 

described on page 9 under Section 4:

 

PRECAUTIONARY LEAK TEST

.

  

  Naked flames (matches or other open 

flames) must not be used to check for leaks, 

this is a dangerous practice to be avoided.

  

  Flammable liquids of any description, 

including petrol, lighter fluid, oils, etc must 

not be stored close to the barbecue.

  

  Spare or extra gas cylinders must NOT 

be stored within close proximity of this 

barbecue or any other gas or electric 

appliance.

  

  Spare or extra gas cylinders should not 

be stored where they are exposed to 

continuous direct sunlight, as this is a 

potentially dangerous practice.

  

  The position of the assembled barbecue 

should be such that the gas cylinder is not 

left exposed to direct sunlight as this is a 

potentially dangerous situation.  

  

  Please read and follow all instructions in this 

manual, if in doubt as to any operational 

or safety precaution contact the customer 

service centre.

  

  Please ensure the gas cylinder is positioned 

outside of the barbecue frame. It must not 

be positioned underneath the barbecue.

  

  For storage and cylinder exchange, 

disconnect the cylinder only. Do not 

disconnect hose from the appliance.

3

Содержание BG2039B2















Отзывы: