Jumbo W1119NA, Руководство пользователя

Страница: 4 / 32

3
4. Open the baby walker frame in the in-use position, ensuring that all wheels touch the floor. Slowly raise the
tray by pulling it in an upward direction, until a click indicates that the frame has been locked correctly in one
of the three positions.
Step 4
Step 5
Step 6
5. Insert the plastic rings of the padded seat in the slots located along the upper edge of the walker
frame. Pass the rings through the slots and
pull
them, ensuring that they are correctly locked in the
position and cannot recede into the slot.
6. Fit the handle on the rear walker frame; simply place it on the housings, located at the rear of the
backrest, and push it firmly in a downward direction, ensuring that it has been fitted in the correct
position. Please do not lift up baby walker
from the
handle. It is dangerous.