4
CODE INPUT SETTING:
You will need the list of codes to manually select and input the correct codes to your
specific device.
1. Turn on the device that you want to set.
2. Look for the brand name under the specific device listing provided.
(Note: You will notice that some brands will have more than one 3-digit code. During the
code input process, you may have to try more than one 3-digit code to match your
device brand and model.)
3. Aim the remote control at the device and press and hold the device button (e.g.TV)
for at least three seconds until the red LED lights up solid red.
4. Using the number keys, enter the first set of 3-digit codes from the list. You will notice
that each number that you press, the LED will blink once. After you have entered the
3rd digit, the red LED will turn off indicating that the code was recognized by the device.
(NOTE: If the code entered was not compatible, the red LED will flash several times.
You will then need to repeat Step 3 to 5. You have 30 seconds to enter a code).
5. After the red LED light has turned off, press the
POWER
button. If the device you are
trying to program powers off, then you have found the correct code. If the device does
not power off, then you will need to repeat the process again from Step 3 using another
3-digit code.
6. Make a note of the 3-digit code for future use.
7. If all the provided codes do not work for your device, you can use the “LEARN” feature.
This allows you to program the remote one button at a time using the buttons on the
remotes that come with your devices.
(NOTE: “LEARN” feature will be discussed in further detail in the following sections).
CODE SEARCH SETTING:
This is an alternative method to programming your device without using the code list. The
remote control will scroll through the list of codes to identify the correct code for your device.
(NOTE: This may take a little longer as the remote control is trying every pre-programmed code).
1. Turn on the device that you want to program.
2. Aim the remote control at the device and press and hold the device button (e.g. TV)
for at least three seconds until the red LED lights up solid red.
3. Press POWER on the remote slowly and repeatedly until the device you are trying
to program shuts off. (Note: The LED will blink once each time you press the POWER button)
4. Once the device powers off, press ENTER button within three seconds to confirm the code
and the LED will turn off.
TV
TV
0
9
...
ENTER