screw
* Fix the R connector to the inside of frame D with a screw.
* R connector for right side
* Fix the connectors to the frame C in the same order as
the frame B.
L connector x8
Socket cap
tube 750 mm are facing inward.
Assembly Instructions
2. Attach the horizontal tube to the connector and
then rotate it by 90 degrees by hand.
pat the panel corner in one by one.
B
* Fix the R connector to the left side and M connector to
the right side of frame B with a flat screw.
* L connector for left side
screw
A
Model No.: SF-3137
*Make sure that screw holes of horizontal
R
panels by hand into horizontal tubes.
tube x8
M4 Hex screwdriver X1
R connector x8
Vertical frame x2
375 mm Horizontal
*Make sure that the concave holes on both
panel x13
sides of the horizontal tube are facing up.
3. Press one side corner into the frame and then others,
4. Insert rubber stoppers for 750 mm floor
Socket cap screw X16
375 mm Steel
Socket cap
L
1. * Fix the L connector to the inside of frame A with a screw.
Causion:
Causion:
* M connectors for extention only
