11
CONSUMER INFORMATION
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA On the
bottom of this equipment is a label that contains, among other information, a product identifier of US: If
requested, this number must be provided to the telephone company.
The applicable jacks (i.e., RJ11C) for this equipment are provided in the packaging with each piece of
approved equipment. The jacks are certified by Universal Service Order Codes (USOC).
A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug are provided with this product. They are designed to be connected to a
compatible modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call.
In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the total RENs, contact the local telephone
company. [For products approved after July 23, 2001, the REN for this product is part of the product
identifier that has the format US: AAAEQ##TXXXX.
The digits represented by ## are the REN without a
decimal point (
e.g.,
03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.
If this equipment FC-0215 causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn’t practical,
the telephone company will notify the customer as soon as possible. Also, you will be advised of your right
to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this happens the telephone company will provide advance
notice in order for you to make necessary modifications to maintain uninterrupted service.
If you experience trouble with this equipment, disconnect it from the network until the problem has been
corrected or until you are sure that the equipment is not malfunctioning.
Please follow instructions for repairing if any (e.g., battery replacement section); otherwise, do not alter or
repair any parts of device except specified.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission or corporation commission for information.
This equipment is hearing aid compatible.
NOTICE:
If your home has specially wired alarm equipment connected to the telephone line, ensure the
installation of this equipment FC-0215 does not disable your alarm equipment. If you have questions
about what will disable alarm equipment, consult your telephone company or a qualified installer.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
SERVICE:
According to FCC regulation. This equipment which has been certified and registered by the
FCC, may only be repaired by authorized person, the FCC certification may be voided. Should you
encounter any problems, please call the FUTURE CALL LLC.
Toll-free Customer Hotline for assistance:
1-888-934-CALL, Monday - Friday between the hours of 9:00 am - 6:00 pm PST
