Jula Meec tools 200-070, Руководство по эксплуатации, Страница: 12 / 14

ENGLISH
12

If working with hazardous liquids, a face mask must be used. Follow the safety precaution
information provided by the manufacturer of such substances as well.

Smoking is prohibited while spray painting and in the work area. Even paint fumes are flammable.

Fireplaces, open flames or equipment causing sparks must not be used at the workplace.

Observe the information and labels for hazardous substances on the work material packaging.
Take appropriate precautions, especially with regard to clothing and face masks.
TECHNICAL DATA
Rated voltage 230 V ~ 50 Hz
Power output 93 W
Specified air volume 23 l/min
Connection 1/8"
Dimensions 245 x 135 x 170 mm
Weight
Sound level 3.6 kg
60-65 dB
Always wear ear protection!
The declared vibration value, which has been measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary assessment of exposure.
WARNING:
The actual vibration level when using power tools may differ from the specified maximum value,
depending on how the tool is used. It is therefore necessary to determine which safety precautions are
required to protect the user, based on an estimate of exposure in actual operating conditions (taking into
account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in
addition to the start-up time).
DESCRIPTION
1. Power cord
2. Power switch
3. Handle
USE
The compressor is fitted with a threaded air hose connection 1/8" BSP or NPT for air hoses. Use a 1/4"
–
1/8" adapter to connect a 1/4" BSP or NPT air hose. Make sure the hose connection is tight.
1. Connect the air hose.
2. Connect the required compressed air tool.
3. Plug in the power cord.
4. Press the power switch.
5. The compressor switches off automatically at 4 bar (adjustable).
NOTE: The compressor is fitted with overheating protection.