Jula Meec tools 003854, Руководство по эксплуатации

Страница: 44 / 47

EN
44
taking it off the tube. Remove any drawn
up objects that can damage the bag
immediately.
IMPORTANT:
• Do not draw up wet grass or leaves, this
can block the rotor.
• Do not overfill the bag, this will reduce
the capacity of the machine and can cause
the engine to overheat.
After use
1. Switch off the engine according to the
instructions.
2. Release the spark plug lead from the spark
plug.
3. Empty the bag after using the suction
function.
4. If the blowpipe has been removed, replace
the screw and washers.
5. If the suction tube has been removed, close
the grille and tighten the knob.
MAINTENANCE
The leaf blower is designed to work for a long
time with a minimum of maintenance. Proper
maintenance and regular cleaning are essential
for the leaf blower to work satisfactorily.
• Make sure that all the screw unions are
properly tightened to keep the product in
safe condition.
• Replace damaged or worn parts.
• Only use approved spare parts and
accessories.
• Store the leaf blower in a dry place when
not in use.
• The manufacturer cannot accept liability for
any damage resulting from failure to follow
these instructions.
NOTE:
Only use parts and accessories recommended
by the manufacturer. The use of other parts
can result in personal injury and/or material
damage. It will also invalidate the warranty.
Cleaning
WARNING!
Release the spark plug lead from the spark
plug before cleaning.
• Keep the ventilation openings on the leaf
blower clean to prevent the engine
overheating.
• Keep the handles clean, dry and free from
oil and grease.
• Clean with a soft cloth moistened with a
mild detergent, ideally every time after it
has been used.
• Never pour or swill water on the leaf
blower. Clean the engine casing with a
damp cloth. Do not use strong detergents
or solvents, they can damage the plastic
parts on the leaf blower. Wipe the engine
casing all over.
• Only use spare parts and accessories,
recommended by the manufacturer. The
use of other parts or accessories can result
in the risk of personal injury and/or
material damage.
Cleaning the air filter
The engine will not work properly if the air filter
is blocked because of the reduction in the supply
of air to the carburettor. The foam plastic filter
unit can get blocked by dust and pollen, etc.
Check the filter at regular intervals.
1. Release the filter cover and remove the
foam plastic filter unit.
FIG. 13
2. Replace the filter cover to prevent anything
getting into the air intake.