![Jula Meec tools 001180 Скачать руководство пользователя страница 46](http://html1.mh-extra.com/html/jula/meec-tools-001180/meec-tools-001180_operating-instructions-manual_2030391046.webp)
EN
46
position slowly when the engine has
started.
6. Press the drive lever against the handle to
start mowing.
FIG. 11
7. Hold the top handle, the engine control
lever and the drive lever in a firm grip and
follow after the lawn mower when it starts
to move forward.
Stopping
1. Release the engine control lever. Check
that the engine stops when the lever is
released.
EMPTYING THE GRASS CATCHER
1. Lift up the ejector flap with one hand, grip
the grass catcher handle with the other,
and lift out the grass catcher. When the
grass catcher is removed the ejector flap
falls down and covers the mulch plug.
2. Empty the grass catcher and replace.
MAINTENANCE
• Clean the lawn mower after use,
especially the underside of the mower
deck and blade mounting.
• Clean the ejector to remove any residual
grass.
• Clean the engine’s cooling fins and the
casing.
• Clean under the drive mechanism cover at
least twice per season. Scrape off
accumulated grass and scrape under the
cover with a spatula or the equivalent.
Before cleaning the drive mechanism
cover, empty the fuel tank and lay the
lawn mower on the opposite side from
the oil filler plug. Do not tilt the lawn
mower more than 90°.
LAWN MOWING
NOTE:
• Always use the lowest mowing height
setting when mowing for the first time
at the start of the season, or when the
grass is very dry. Do not mow more than
1/3 of the height of the grass.
• If cuttings come onto the lawn behind
the lawn mower the side ejector may be
blocked, the grass catcher could be full,
or the underside of the mower deck
could be blocked.
Starting
NOTE:
• Before starting the engine, manoeuvre
the engine lever several times to check
the wire moves easily.
• Check before starting that the blade is
correctly and securely fitted.
• Check that the spark plug lead is
connected to the spark plug, that the oil
level is correct, and that there is petrol in
the fuel tank.
1. Set the required mowing height.
2. When starting a cold engine or if the
engine stops due to lack of fuel, press the
primer bulb 3-5 times. It is not necessary
to use the primer bulb if the engine is
warm.
3. Press the engine control lever towards the
top handle.
FIG. 10
4. Stand behind lawn mower. To start the
engine, pull the starter cord slowly until it
catches (about 10–15 cm) and then pull
quickly. If the engine has not started after
three attempts, repeat the process from
the beginning.
5. Let the starter handle return to its original
Содержание Meec tools 001180
