17
1.
Locking pin
2.
Frame
3.
Rubber lead-through,18 mm
4.
Cord guide, outside
5.
Awning fabric
6.
Bar
7.
Bar fastener, front edge
8.
Catch
9.
Brake unit
10. Cord
11. Cord guide, inside
A.
Inside
B.
Outside
NOTE:
The internal cord guide and brake unit can be fitted to the left or right of the window.
1.
Drill a hole in the wall for the rubber lead-through and remove the dust. The hole through the wall
should angle down 3° from the inside to prevent rainwater getting into the wall.
2.
Cut the rubber lead-through to the thickness of the wall and insert it in the hole in the wall.
3.
Put the cord guide on the outside in its upper position and the cord guide on the inside in its lower
position.
4.
Pull the cord through the cord guide on the outside, through the rubber lead-through, and through
the cord guide on the inside, the brake unit and catch.
5.
Fit suitable plastic expander plugs and screw on the fasteners.
1.
Cord guide, inside
2.
Brake unit
3.
Catch
4.
Rubber lead-through
5.
Window
