Jula Hard Head 666-038, Инструкция пользователя

Страница: 17 / 19

EN
17
the ceiling at various points to share the load.
• Tools required for installation: measuring tape, pen, spirit level, wrench, hammer, drill and 12
mm drill bit.
1. Mark the drill holes in the ceiling. A hole template can be found on the inside of the box lid.
2. Drill the holes.
3. Hammer the expansion bolts into the drilled holes until they are flush with the ceiling.
4. Fit the brackets to the concrete ceiling (Figure 1).
5. Bolt the frame sections A, B and C in place (Figure 2).
6. Fit the square tubular sections to the frame section A (Figure 3).
7. Fit the plastic covers (Figure 4).
8. Fit the shelf to the brackets (Figure 5).
9. Put the mesh in place (Figure 6).
10. Attach the mesh using the Velcro strips (Figure 7).
11. Adjust the height (Figure 8).
1 2
3
4