Jula 960-138, Руководство по эксплуатации

Страница: 26 / 29

ENGLISH
26
2. Switch off the helicopter and insert the
charger connector in the charger connection.
3. The status light goes green.
When the status light goes red, the remote
control needs charging. The status light
flashes with red and green during the
charging.
Preparations
1. Place the helicopter on a level surface and
switch on the power switch. (Wait for 5
seconds.)
Lowest position of joystick
2. Make sure to stand at least one metre behind the helicopter.
3. Check that there are no people, animals or other obstacles in the area. Joystick down
4. Switch on the remote control, move the power control to the top and then back down.
5. Check that the frequency of the remote control corresponds to the helicopter frequency, and does
not interfere, or is interfered by, some other radio controlled aircraft nearby.
6. The battery level is low if the red status light starts flashing. Put in new batteries.
Recommended conditions for use
When flying indoors, make sure that there are no people, pets or objects in the way.
NOTE:
Choose a place which is suitable for flying.
1.
Never allow the helicopter to fly out of sight. Only for use under the supervision of an adult.
2. Check that nobody else nearby is using the same frequency.
3. Avoid air flows from electric fans and air conditioning units.