EN
13
Read the user instructions carefully before use!
Save these instructions for future reference.
TECHNICAL DATA
Dimensions
W120 x H60 x D20 cm
Weight
15 kg
ASSEMBLY
1.
Place the upper panel vertically with the rear end against the floor.
2.
There are 3 holes at one edge of the top panel intended for the doors. This edge must face
away from the floor.
– Assemble the left and right-hand side panels with pins and screws.
– Assemble the centre panel I and II with pins and screws. Exercise care not to mix them up.
Centre panel II has a double seal on the front edge.
3.
Lift up the partially assembled shelf and fit the rear panel with pins and screws.
4.
Place the partially assembled shelf with the rear towards the floor.
– Insert the upper pivot on each door in the corresponding holes on the upper panel.
– Align the lower pivot on each door with the holes in the bottom panel and fit the bottom
panel on the side and centre panels with pins and screws.
5.
Fasten the two mounting brackets on the rear edge of the rear panel.
6.
Align the door locks in each door and fit the washer and nut.
7.
Tighten all bolted joints firmly. Assemble the shelf supports and shelves.
8.
Put the cabinet on the wall with wood screws or with concrete anchors and screws. Use screws
suitable for the substrate and which can support the weight of the cabinet and contents.
User instructions for
wall cabinet
ENGLISH