ENGLISH
8
ENGLISH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use
Switch off the work lamp and disconnect it from the power outlet before carrying out maintenance.
Do not use the work lamp if the power cord or plug are damaged in any way. For safety reasons,
the power cord must only be replaced or repaired by an authorised service centre. This also
applies to other repairs. Consult your dealer.
The work lamp must be connected to an earthed power outlet.
Failure to follow the instructions in these Operating Instructions can result in electric shock.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output
Bulb: 2 x 18 W
Socket: 1500 W
Safety class
I
Protection rating
IP54
Base 2G11
MAINTENANCE
Changing the bulb
1.
Disconnect the work lamp from the power
outlet.
2.
Open and remove the rubber trim from the
work lamp.
3. Remove
the
cover.
4.
Replace the broken bulb with an identical
bulb.
5.
Refit the rubber trim and the lamp cover.
