ENGLISH
5
ENGLI SH
SAFETY INSTRUCTIONS
Read these instructions carefully!
Switch off the power before installing the fitting.
The light fitting must be connected to protective earth.
Make sure that screws and protective glass are fitted correctly.
Electrical safety
New installations and extensions to existing systems must always be performed by a qualified electrician.
If you have the necessary experience and knowledge, you may replace switches and wall sockets, fit
plugs, extension cords and lamp holders. If not, you should contact an electrician. Improper installation
may result in electric shock or fire.
TECHNICAL DATA
Rated voltage
230 V/50 Hz
Output
6 x 1 W
Bulb type
LED
Protection rating
IP54
Safety class
I
Temperature range
-20
C - +40
C
Material
Cast aluminium with protective glass
INSTALLATION
NOTE:
Make sure the power is switched off before installing the
fitting.
1.
Undo the screws holding the lamp's wall bracket.
2.
Measure where to make holes on the wall for installation
of the lamp.
3.
Predrill the mounting holes in the wall.
4.
Connect the power cables to the terminal blocks. Make
sure that the connections are correct.
5.
Fit the wall bracket to the wall. Use wall plugs, if
necessary.
6.
Attach the lamp to the bracket.
7.
Switch on the power.
Subject to printing errors and design changes over which we have no control. In the event of problems,
please contact our service department.
www.jula.com