EN
24
fIttIng the SILLS anD reInforceMent StrUtS
Carefully place the vehicle on its side and mount the lateral sills and reinforcement struts in the front and back with the screws included
fIttIng the SteerIng wheeL
Remove the screw and nut from the steering wheel Connect the cables from the steering wheel to the cables from the instrument panel
Mount the steering wheel onto the steering column, fit it into the hole and lock into place with the screw and nut
connectIng the Battery
Connect the red and black wires below the bonnet to the corresponding battery terminals Plus to plus and minus to minus
fIttIng the front wInDShIeLD
Place the windshield in the proper position and push down carefully until it clicks into place (1)
Screw down the windshield in the position shown (2) using the screws included
fIttIng the rear wInDShIeLD
Place the rear windshield in the proper position and push down carefully until it clicks into place (1) If necessary, a slotted screwdriver or another
flat instrument can be used to get the windshield’s striker to lock into place Be careful not to damage the paint
2
2
1
1
