16
ENGLI SH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use!
WARNING!
Check that the mains voltage corresponds to the rated voltage on the type plate.
Never cut sheets thicker than that specified above.
Do not use the machine for purposes other than that indicated above.
Do not overload the motor by using the machine continuously for extended periods.
Take care during use.
NOTE!
Before use, check that all screw connections are tightened and that the secondary handle has
been installed.
Children may not use the machine.
Secure the sheet that is to be cut to the worktable and then connect the power cord. Move the
switch forwards to start the machine. Start cutting the sheet after the machine has started. Maintain
an angle of 90° between the blade and the sheet that is to be cut.
Do not turn off the machine with the blade still in the material to be cut. This can result in the blade
being destroyed.
TECHNICAL DATA
Mains frequency
50/60 Hz
Output power
625 W
Speed, cutter
25,000 rpm
Speed, cutting
800 rpm
Length
298 mm
Height
228 mm
Weight
4.0 kg
Sound power level, LwA
90,9 dB(A)
Sound pressure level, LpA
79,9 dB (A), K= 3 dB
Max. vibration level
1,77 m/s
2
, K= 1,5 m/s
2
Always wear ear protection.
The declared vibration value, which has been measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary assessment of exposure.
WARNING!
The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of exposure in actual operating conditions (taking
into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling,
in addition to the start-up time).
