JUKI UnionSpecial 35800BLW, Инструкции по настройке / Иллюстрированный список запчастей

Страница: 6 / 68

STYLE OF MACHINES (CONT.)
35800BWWP Same as 35800BWW except presser and roller bars are equipped with double acting air
cylinders. Air is used to supply down pressure and lift for presser foot and roller assembly.
35800BWWL DOUBLE LAP SEAM. Same as 35800BWW without the folder .
35800BWWPL Same as 35800BWWL except presser and roller bars are equipped with double acting air
cylinders.Air is used to supply down pressure and lift for presser foot and roller assembly.
35800BWDN Lower differential feed high step throat plate, wide presser foot with seam groove feed dogs
flat front to back belt-driven, wide steel teeth feed roller.
35800BWDR Plain feed high step throat plate wide presser foot with seam groove raised front teeth on
feed dogs belt-driven, wide steel teeth feed roller.
35800BRWH Same as BWDR above, except with feed dogs flat front to back and smooth rubber feed roller
ILLUSTRATIONS
This manual has been arranged to simplify ordering repair parts. Exploded views of various sections of the
mechanism are shown so that the parts may be seen in their actual position in the machine. On the page
opposite the illustration will be found a listing of the parts with their part numbers, description and the
number of pieces required in the particular view being shown.
Numbers in the first column are reference numbers only, and merely indicate the position of the part in the illustration. The
reference number should never be used in ordering parts. Always use the part number listed in the second column.
Component parts of sub-assemblies which can be furnished for repairs are indicated by indenting their descriptions under
the description of the main sub-assembly. As an example refer to the following text.
9. 29126 EC Upper Looper Drive Shaft Assembly ................................................................................ 1
10. 22503 F Screw ............................................................................................................................. 1
11. 39543 E Cam Follower Locking Clamp ......................................................................................... 1
It will be noted in the previous example that the cam follower, bushing and cam guide and the upper looper drive shaft
are not listed. The reason is that replacement of these parts individually is not recommended, so the complete upper looper
drive shaft assembly should be ordered.
When a part is common to all machines covered in this manual, no specific usage will be mentioned in the description.
However, when the parts for the various machines are not the same, the specific usage will be mentioned in the description
and, if necessary, the difference will be shown in the illustration.
A numerical index of all the parts shown in this manual is located at the back. This will facilitate locating the illustration and
description when only a part number is known.
IDENTIFYING PARTS
Where the construction permits, each part is marked with its part number. On some of the smaller parts and on those where
construction does not permit, an identification letter is marked in to distinguish the part from similar ones.
PLEASE NOTE: Part numbers represent the same part, regardless of which manual they appear. On all orders please
include part number, name and style of machine for which the part was ordered.
TERMS
Prices are net cash and subject to change without notice. All shipments are forwarded F.O.B. shipping point.
A charge is made to cover postage and insurance.
6