Thread / cones / spools
The anti-vibration cone should be
used with the wider edge at the
bottom on the spool holder pin
when sewing with cones.
Large spools
If large industrial spools are used,
position the anti-vibration cone
upside down on the spool holder
pin, i .e. with the wider edge at the
top.
Household spools
Remove the anti-vibration cones.
Place spools on spool holder pins
and push the spool caps on with
the rounded side downwards.
Thread net
If the threads slip and get twisted,
cover the looper spools with the
net supplied in the accessory bag.
Preparing the machine / Using the machine
Using the machine
Power/light switch
The power/light switch is conveniently placed on the handwheel side of the
machine in front of the socket.
O = Off
I = On with light
Raising the upper knife
Switch the machine off (power switch ”O”)
• Turn the handwheel towards you until the needles are fully raised.
• Open the looper cover.
Press the upper knife holder (E) to the right. Turn the knob clockwise (F) until
the knife is in the position illustrated (G).
E
F
G
CAUTION :
Perform these following steps when you are not using your sewing machine:
1. Be sure to turn OFF the power switch.
2. Be sure to remove the power plug from the wall outlet.
3. Do not place a thing on the foot controller.
9
