JUKI MF-7524, Инструкция по эксплуатации

Страница: 17 / 34

– 15 –
1) Loosen setscrews
❶
, adjust so that 12 mm is given
from the center of the upper screw to the top surface
of thread guide, and tighten the thread guide with
setscrews
❶
.
2) Loosen setscrew ❷ and adjust the position from the
center of screws
❶
to the center of needle thread
guide rod to the extreme right position (38 mm). Then
tighten screw
❷
to fix the thread guide rod.
A B C D
17mm 22mm 28mm 31mm
(38 mm)
12 mm
❷ ❶
Ⅵ . ADJUSTING THE SEWING MACHINE
1. Adjusting the silicon container thread guide
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
3) Loosen setscrews
❸
and adjust so that the heights
of the respective needle thread guide rods are the
dimensions as shown in the illustration. Then tighten
screws
❸
to fix the thread guide rods.
A
B
C
❸
D