JUKI MB-1373, Инструкция по эксплуатации

Страница: 14 / 18

– 12 –
4-3. attachments
1) In order to nstall the attachment on the machne,
you may have to remove button clamp mecha-
nsm
1
or feed plate
2
.
2) Detach the snap rng from button clamp nstallng
stud
3
, and you wll be able to remove button
clamp mechansm assembly
1
. Remove screw
4
, and you can remove feed plate
2
.
the only feature that makes the difference
between the attachment of MB-373ns and
that of MB-377ns is button clamp lifting
hook
5
.
Use Flat buttons Shank buttons
Snaps
Large-sze Medum-sze General
MB-1373
MB-1377
Z201 Z202 Z033 Z037
Schematc
drawng
Remarks Button sze :
A : 3 to 6.5 mm
B : ø20 to ø28 mm Button sze :
A : 3 to 5 mm
B : ø12 to ø20 mm Button dameter : Less than 16 mm
Shank sze :
Thckness : 6 to 5 mm
Wdth : 3 to 2.5 mm
Snap sze :
A : 8 mm
Use Wrapped-around buttons Metal buttons
Stay button Labels
Frst process Second process General
MB-1373
MB-1377
Z041 Z035 Z038 Z039 Z044
Schematc
drawng
Remarks Thread shank heght
A : 5.5 mm Common to
Z041 Sttch wdth :
3 to 6.5 mm
WarnInG :
to protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
1
2
5
4
3
A
B
A
A
B