JUKI M-1 Series, Инструкция по эксплуатации

Страница: 7 / 15

5
3:
Operating Parameter Description Table
3.1
Technician system parameter list
( long press
to enter )
NO.
Function
description
Parameter
default
values
Parameter
adjustment
range
Parameter description
S02
Check the number
of needles after
living the first
infrared light
20 1~50
Set the number of needles between
two infrared light
S03
Delay before
trimming the
number of stitches
4 0~50
After the behind infrared light
sensing, the number of stitches to
delay trim
S04
Delay after
trimming the
number of stitches
4 0~50
After the behind infrared light
leaving, the number of stitches to
delay trim
S05
Front suction open
needle number
2 1~50
Induction of the first infrared light
from which needles began to inhale
S06
Front suction close
needle number
14 1~50
When opened, the count after a few
stitches to close the intake
S07
Behind suction
open needle
number
2 1~50
leaving the behind infrared light
from which needles began to inhale
S08
Behind suction
close delay
200
50~5000
ms
After leaving the light eye, count
how much milliseconds to close the
inhale
S12
Stop delay pin
number
2 1~99
After How many needles , it
automatically stops after the cut line
S13
The suction
opening pin
number
50 1~247
Suction after how many needles
leave eye light