−
57
−
6 8
™
When removing/installing the motor, unless the motor is
defective, loosen coupling setscrew
8
without loosening
coupling setscrews
6
and remove the motor with the coupling
installed.
™
When the motor is separated
from the coupling, set the
clearance between the end face
of the motor and that of the
coupling to 0.5 mm when re-
assembling.
™
For re-assembling the stepping
m o t o r u n i t , r e f e r t o 3 - 2 )
Adjusting the feed timing.
0.5 mm
Caution in disassembling
Caution in assembling
