JUKI LU-2810-6, Инструкция по эксплуатации

Страница: 7 / 14

– 5 –
(How to remove the handwheel)
To remove handwheel ❶ , loosen screws ❷ and ❸
and remove handwheel
❶
in such a state that it is
assembled with handwheel A ❹ .
Do not remove only handwheel ❶ by loos-
ening setscrew
❺
.
(How to assemble the handwheel)
Check to make sure that handwheel A ❹ does not
come in contact with cylinder ❼ when screw
❷
of
handwheel A ❹ is brought to the position where it is
aligned with the flat section of main shaft ❻ . Then,
fix the handwheel on main shaft
❻
. At this time,
main shaft ❻ protrude from handwheel ❶ by ap-
proximately 7 mm.
❺
❶
❷
❸
❹
❼
❻
Flat section