JUKI LS-2342, Инструкция по эксплуатации

Страница: 25 / 31

– 23 –
❶ ❷ ❸ ❹ ❺ ❻
❸ Needle lifting switch
When the switch is pressed, the needle moves from
its lower-end stop position to its upper-end stop
position.
❹ 2P switch (LS-2342S-7, 2342H-7)
If this switch is pressed, the stitch length is changed
over to that of the scale on the 2P feed adjusting
dial. (Lamp in the button is lit up.)
Be sure to make the number of 2P feed
adjusting dial less than that of the standard
feed adjusting dial.
Example
• Standard feed adjusting dial scale : 9
• 2P feed adjusting dial scale : 6
• When this switch is pressed, the stitch length is
changed over from 9 to 6 and the lamp lights up.
OFF ON
• When this switch pressed again, the stitch length
returns from 6 to 9 and the lamp goes out.
❺ Needle thread tension changeover switch
When the switch is pressed, the double tension function is selected to increase the needle thread tension. (The
lamp above the switch is lit up.)
❻
This is not used.