JUKI IT-20, Инструкция по эксплуатации

Страница: 20 / 20

– 18 –
6. ERROR INdICATION
Error code Error description Restoration method
E011 External medium not inserted
No medium is inserted.
Reset (Press the switch.)
E012 Read error
Data cannot be read from the medium.
Reset (Press the switch.)
E013 write error
Data cannot be written into the medium.
Reset (Press the switch.)
E015 format error
The medium cannot be formatted.
Reset (Press the switch.)
E016 External medium capacity exceeded
The capacity of the medium is insufficient.
Reset (Press the switch.)
E021 Medium access failure Reset (Press the switch.)
E065 Network transmission failure
Data cannot be transmitted to the network.
Reset (Press the switch.)
E067 Id data reading failure
ID data stored in the medium is corrupt.
Reset (Press the switch.)
E204 USB insertion
The sewing machine was started up with USB inserted.
Reset (Press the switch.)
E205 Remaining ISS buffer capacity warning
The buffer for ISS data storage is going to be full soon. When it is
full and used, data will be erased from the oldest ones.
Reset (Press the switch.)
E206 warning about the logic of sewing machine rotation signal
The sewing machine rotation signal cannot be acquired.
Check the setting of the memory switch U09 referring to the
Setup Manual.
Reset (Press the switch.)
E915 Operation panel
⇔
electrical BOX communication error
Error occurred in data communication.
Turn OFF the power
E938 Error in program rewriting file Turn OFF the power
E949 No file for program rewriting Turn OFF the power
E950 There are several files for program rewriting. Turn OFF the power
This system enables interlock (or restriction of functions) to prevent the problem from spreading in case a problem
is detected, and contains the following error codes to notify the problems. When requesting for service, please also
check the error code.
Error code display
for some models of the sewing machines, errors are not saved as ISS data.