– 7 –
A part of function setting items can be easily changed in the normal sewing state.
6-3. One-touch setting
[One-touch setting procedure]
1) Keep
switch
7
held pressed for one
second to place the panel in the function
setting mode.
2) Change over the item to be set by using
switch
3
or
switch
4
. Then, the
set value can be changed by using
switch
5
and
switch
6
.
3) To return to the normal sewing state, press
switch
7
.
The setting is confirmed by press
-
ing
switch
7
.
1
Thread trimming function (
)
: Thread trimming operation is not performed (so-
lenoid output prohibition: Thread trimmer, wiper)
: Thread trimming operation is effective.
2
Wiper function (
)
: Wiper does not operate after thread trimming
: Wiper operates after thread trimming
3
One-shot automatic stitching function (
)
: One-shot automatic stitching function is ineffective.
: One-shot automatic stitching is effective.
※ This function is rendered effective when the material end sensor function is set. It is not possible
to prohibit the one-shot operation during overlapped sewing operation. The number of revolution
is the value which is set for setting No. 38.
4
Setting of the max. sewing speed (
)
The max. sewing speed of the machine head is set. The upper limit of the set value differs with the type of ma-
chine head to which the SC is connected.
Setting range : 150 - Max. value [sti/min]
5
Material end sensor function (
)
: Material end sensor function is ineffective.
: Once the material end is detected, the sewing machine stops running after having sewn the num-
ber of stitches set with
7
(
).
※ This function is rendered effective when the material end sensor function is set.
6
Thread trimming function by material end sensor (
)
: Automatic thread trimming function after the detection of material end is ineffective.
: Once the material end is detected, the sewing machine performs thread trimming after having
sewn the number of stitches set with
7
(
).
※ This function is rendered effective when the material end sensor function is set.
7
Number of stitches for material end sensor (
)
The number of stitches to be sewn from the detection of material end to the stop of the sewing machine
Number of stitches that can be set: 0 to 19 (stitches)
※ This function is rendered effective when the material end sensor function is set.
If the number of stitches specified is inadequate, the sewing machine can fail to stop within the
preset number of stitches depending on the number of revolutions of the sewing machine.
7
3
4
5
6
Содержание IT-10
Страница 1: ...ENGLISH IT 10 INSTRUCTION MANUAL ...
