manualshive.com logo in svg

JUKI IP-310, Руководство по установке

Поделиться
Скачать
JUKI IP-310 Скачать руководство пользователя страница 2

Operating power voltage of this product is DC+24V.

CONTENTS

!

. OUTLINE ........................................................................................................................1

@

. CONTENTS OF THE ARTICLES PACKED TOGETHER ..............................................1

1. For those who have purchased the machine provided with IP-310 operation panel .......................1

2. For those who have purchased the single unit of IP-310 operation panel ........................................1

#

. INSTALLING IP-310 ON TABLE/STAN AND CONTROL BOX .....................................2

1. Installing procedure of the operation panel and the installing base .................................................2

2. Connecting the cord and turning ON the power ..................................................................................2

$

. EXPLANATION OF THE OPERATION PANEL .............................................................3

%

. CONNECTING PROCEDURE OF OPERATION PANEL WITH EXTERNAL VEHICLE ....4

1. Media  .......................................................................................................................................................4

2. RS-232C ...................................................................................................................................................6

3. Input of signal by means of the connector for external input ............................................................7

^

. RE-SETUP OF THE PROGRAM OF THE OPERATION PANEL ...................................8

&

. RE-SETUP OF MAIN PROGRAM ................................................................................11

1. When panel program matches with main program ...........................................................................11

2. When panel program does not match with main program and an error occurs ............................14

*

. RE-SETUP OF SERVO PROGRAM ............................................................................17

1. When main program matches with servo program ...........................................................................17

2. When panel program does not match with main program and an error occurs ............................20

(

. WHEN USING THE MEDIA OTHER THAN  

THAT PACKED TOGETHER WITH THE MACHINE ...................................................23

Содержание IP-310


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды