JUKI HZL-F series, Руководство по обслуживанию, Страница: 10 / 32

– 7 –
9) Front panel
○
Pull out the pattern adjustment dial.
○ Remove setscrews
@2
and
@3
from the front panel.
○
Put a thin screwdriver in the notch in the rising section under the arm and pry
off the front panel and hook
A
of the rear panel.
○ Opening the right side of the front panel in the direction of the arrow, tap
Z
section with your hand to remove hook
B
located at the bed surface.
○ Lastly, remove hook
C
located at the lower side of the machine jaw.
○
Remove connectors for SUMI-card, start switch and LED lamp from the
microcomputer PCB when necessary.
@3
@2
Notch
A
B
C
Z
Open
@4
@5
@6
10) Rear panel
○ Remove setscrews
@4
,
@5
and
@6
from the rear panel.
Remove the rear panel with the presser foot lifting lever raised.
Pattern adjustment dial