JUKI HZL-70 series Скачать руководство пользователя страница 62

Страница: 62 / 64

Seam
puckering

Problem

Cause

Correction

1. The needle thread tension is too tight.

2. The needle thread is not threaded

correctly.

3. The needle is too heavy for the fabric

being sewn.

4. The stitch length is too long for the fabric.

1. Lossen the thread tension.

2. Rethread the machine.

3. Choose a needle to suit the thread and

fabric.

4. Make stitch dense.

Reference

5. If you are sewing thin fabric.

5. Sew with stabiliser material under the fabric.

Patterns are
distorted

1. Select the correct foot.

The sewing
machine
doesn't
operate

The machine

jams

The machine
is noisy

Uneven
stitches,
uneven feed

1. The correct presser foot is not used.

2. The needle thread tension is too tight.

2. Loosen the thread tension .

1. The machine is not turned on.

3. The presser foot lifter is raised.

4. The bobbin winder spindle is in the right

position.

1. Turn on the machine.

3. Lower the presser foot lifter.

4. Return the bobbin winder spindle to the

left position.

Remove the upper thread and bobbin case,
turn the handwheel backwards and forwards
by hand and remove the thread remands.

1. Fluff or oil have collected on the hook or

needle bar.

2. The needle is damaged.

1. Clean the hook and feed dog as described.

2. Replace the needle.

1. Poor quality thread.

2. The bobbin case is threaded wrong.

3. Fabric has been pulled.

1. Select a better quality thread.

2. Remove the bobbin case, the thread and

reinsert correctly.

3. Do not pull on the fabric while sewing, let it

be taken up by the machine.

4. Thread is caught in the hook.

3. Slight humming sound coming from

internal motor.

3. Normal.

5. The feed dogs are packed with lint.

Remove the upper thread and bobbin case,
turn the handwheel backwards and forwards
by hand and remove the thread remands.

1. Thread is caught in the hook.

2. The feed dogs are packed with lint.

2. Connect the power line plug to the electric

outlet.

2. The machine is not plugged in.

Содержание HZL-70 series

































































Результаты поиска

Содержание HZL-70 series

Отзывы:

Бренды по названию

Популярные бренды

JUKI HZL-70 series, Инструкция по эксплуатации

Результаты поиска

Содержание HZL-70 series

Отзывы:

Бренды по названию

Популярные бренды