− 7 −
7.
INSTALLING SP-46 (CLAMP BAR STACKER)
(OPTIONAL PART NO. : 40058952)
Clamp bar stacker is delivered in the state
that it is fixed in the frame at the time
of delivery with the clamp bar stacker
mounted. It is necessary to change the
installing position to the normal using
position.
1
Remove stacker fixing plate
1
.
2
Turn the whole stacker in the direction of the
arrow and take it out from inside of the frame.
3
Change stacker turning shaft
A
section to
stacker base hole
B
.
At this time, take care to prevent the stacker cord, the air piping, etc. from being caught.
4
Lock the whole stacker with hinge
2
.
5
Enter safety bar
3
from
C
and
D
directions
and fix it at the position where is almost
parallel to the floor.
At this time, confirm that air is being
supplied.
C
D
3
2
1
A
B
6.
ASSEMBLING THE THREAD STAND AND ATTACHING IT TO
THE MACHINE
Putting nut and washer between main unit frame
1
and fix the thread stand as illustrated in the left-
hand figure.
Washer
Spring washer
Nut
1
