– 42 –
Press STEP SEWING button
A
on the sewing screen to
display the step sewing screen.
The sewing shape is displayed at the center of the screen. The
current point, sewing start position and sewing end position
are respectively represented by (pink circle), (blue dot) and
(pink dot).
Press the MODE SELECT button
B
to select the thread
tension mode.
When ONE-STITCH BACKWARD button
C
or FOR-
WARD button
D
is pressed, the feed (current point )
moves backward or forward by one stitch.
If two or more commands including the thread trimming com-
mend have been entered, the feed will not move when the
ONE-STITCH BACKWARD/FORWARD button is pressed,
but the command shown on the command display A will be
changed over.
If the ONE-STITCH BACKWARD/FORWARD button is held
pressed for a longer time, the feed moving speed will increase.
The value B displayed represents the number of stitches.
When COMMAND SEARCH FORWARD button
E
or
BACKWARD button
F
is pressed, the feed moves for-
ward or backward from the current point to reach the needle
entry point where the first thread tension command is found.
To stop the feed, press button
C
,
D
,
E
,
F
,
G
or
H
.
When PRESSER DOWN button
G
is pressed, the
presser plunger goes up or comes down. When CANCEL but-
ton
K
is pressed, the presser plate moves to the interme-
diate standby position and the screen is returned to the sewing
screen.
When PRESSER INITIAL POSITION button
H
is
pressed, the presser plate directly moves to the sewing start
position.
When COMMAND DELETE button
I
is pressed, the
screen for deleting the command as shown in A is displayed.
When
J
is pressed, the thread tension value increase/
decrease input screen is displayed.
Input a desired value on the thread tension value increase/de-
crease input screen using numeric keypad and +/– keys
L
.
When ENTER button
M
is pressed, the data is con-
firmed.
2-9. Performing modification of needle entry point
A
B
M
D
G
E
H
I
A
B
J
C
L
F
K
