JUKI AMS-221F3020RSW/AW-3 Скачать руководство пользователя страница 101

Страница: 101 / 163

– 96 –

2-8. Information list

1) Basic operation

In this step of procedure, the information list screen is displayed.

In the case of the operator level display, only the confirmation of

set contents and clearing of the current value are possible. Setting
cannot be changed on the operator level display.

①

Displaying the information list screen

When is pressed on the pattern setting screen, the infor-

mation list screen is displayed.

②

Exiting from the information list screen

When

is pressed on the information list screen, the

information list screen is closed, and the screen returns to the
pattern setting screen.

2) Display of the maintenance personnel level

It is necessary to display the information list screen (maintenance
personnel level) in order to carry out setting of functions.

①

Displaying the information list screen (maintenance

personnel level)

When is held pressed for three seconds on the pattern

setting screen, the information list screen (maintenance per-
sonnel level) is displayed.

②

Exiting from the information list screen (maintenance

personnel level)

When

is pressed on the information list screen, the

information list screen is closed, and the screen returns to the
pattern setting screen.

3) Information display list

The following items are displayed on the information list screen.

Name of item

Overview

1 Maintenance

management setting

The warning screen is displayed according to
the warning counter setting.

Содержание AMS-221F3020RSW/AW-3




































































































































































Результаты поиска

Содержание AMS-221F3020RSW/AW-3

Отзывы:

JUKI AMS-221F3020RSW/AW-3, Инструкция по эксплуатации, Страница: 101 / 163

Результаты поиска

Содержание AMS-221F3020RSW/AW-3

Отзывы: