8
＊
Exclusive part for sewing area code 1306(X:1306mm-Y:60mm)
Parts for any area other than the above are available on special order.
Description
Part No.
Feature
The model is best-suited to circular sewing, for attaching small patches such
as labels and emblems.
★
For the S type (motor-driven feeding frame), the AMS-210EN pneumatic
set is required.
It blows air on the needle to prevent thread breakage due to heat.
★
For the S type (motor-driven feeding frame), the AMS-210EN pneumatic
set is required.
(To use the side-sweeping wiper, part number 40035692 should be ordered.)
The pneumatic set is required when the S type (motor-driven feeding frame)
uses pneumatic inverted clamp device and needle cooler.
A side wiping type is also available depending on the sewing products or
sewing conditions.
The feeding frame and the feed plate can be quickly changed without any
tools.
The next material to be sewn can be placed between the top and bottom
plates of the cassette holder while the machine is still engaged in the
sewing of the currently set material.
So as to prevent any accidents that may be caused when the feeding
frame does not match a program, a program which matches the feeding
frame can be invoked by reading the bar-code.
The transformer is required when the sewing machine is used in a
high-voltage area (380V/400V/415V).
It is possible to make up and down movements same as manual pedal.
★
Not available to S type machine head.
Description
Part No.
Feature
Cassette holder
Bar-code reader
One-touch utility clamp
◎
AMS- 210EN
Series
◎
AMS- 221EN
Series
●
Device/Parts
One-touch utility clamp
Exclusive to the monolithic feeding frame
One-touch utility clamp
Exclusive to the separately-driven feeding frame
Transformer for the single-phase high-voltage
power supply
Pneumatic inverted clamp device
Needle cooler asm.
AMS-210EN pneumatic set
Side wiper asm.
Relay cable asm. for the side wiper
Cassette holder asm.
Cassette holder fixing base asm.
Mechanical valve unit
Bar-code reader
40092951
＊
40092717
(40035692)
40089848
40035867
B4150210DA0
40089692
40089695
B2953210DA0
＊
B2594210DA0
＊
40042352
40089238
40005422
The transformer is required when the sewing machine is used in a
high-voltage area (380V/400V/415V).
Transformer for the single-phase high-voltage
power supply
40005422
Side wiper asm.
Relay cable asm. for the side wiper
Needle cooler asm.
Cassette holder asm. for 2516
Cassette holder asm. for 3020
Cassette holder fixing base asm. for 3020
One-touch utility clamp
Bar-code reader
Cassette holder fixing base asm. for 2516
40035867
40036668
B25822210A0
40052328
40053777
40053782
40052330
40089238
40092717
(40035692)
A side wiping type is also available depending on the sewing products or
sewing conditions.
It blows air on the needle to prevent thread breakage due to heat.
(To use the side-sweeping wiper, part number 40035692 should be
ordered.)
The next material to be sewn can be placed between the top and bottom
plates of the cassette holder while the machine is still engaged in the
sewing of the currently set material.
The feeding frame and the feed plate can be quickly changed without any
tools.
The one-touch utility clamp has been specifically designed for Area Code
2516.
So as to prevent any accidents that may be caused when the feeding
frame does not match a program, a program which matches the feeding
frame can be invoked by reading the bar-code.
