JUKI AMS-210E-1306, Инструкция по эксплуатации

Страница: 70 / 128

– 66 –
4
Display the threading diagram.
When threading button
G
displayed in the maintenance
and inspection screen is pressed, the needle thread threading
diagram is displayed. Observe it when performing threading.
(2) Releasing procedure of the warning
When the designated inspection time is reached, the warning
screen is displayed.
In case of clearing the inspection time, press CLEAR button
A
. The inspection time is cleared and the pop-up is closed. In case
of not clearing the inspection time, press CANCEL button
B
and close the pop-up. Every time one sewing is completed, the
warning screen is displayed until the inspection time is cleared.
Warning Nos. of the respective items are as follows.
• Needle replacement : A201
• Cleaning time
: A202
• Oil replacement time : A203
For the grease-up portion, refer to the item of
"
#
-1-12. Replenishing the designated places with
grease" .
[When displaying from the information screen]
(3) Observing the production control information
It is possible to designate the start, display the number of pieces of production from the start to the
existing time, display the number of pieces of production target, etc. in the production control screen.
There are two kinds of display ways for the production control screen.
1
Display the information screen.
When information key
A
of the switch seat section is
pressed in the data input screen, the information screen is
displayed.
A
G
B
A