juju Navi Safe, Руководство пользователя

Страница: 6 / 34

6
NOTICE
This is a ”Universal” child restraint. It is approved to Regulation No. 44, 04
series of amendments, for general use in vehicles and it will fit most, but not
all, car seats.
A correct fit is likely if the vehicle manufacturer has declared in the vehicle
handbook that the vehicle is capable of accepting a ”Universal” child restraint
for this age group.
This child restraint has been classified as ”Universal” under more stringent
conditions than those which applied to earlier designs which do not carry this
notice.
If in doubt, consult either the child restraint manufacturer or the retailer.
The child car seat can only be fitted into cars equipped with 3 point seat belt
system. The belt system must be approved to Reg. ECE 16 or equivalent.
The safety seat can not be used without its original cover. The original cover is
part of the homologation. Only replace the seat cover with one recommended
by manufacturer.
Instructions for use as a ”Group 0” car safety seat (from
birth to 9 kgs appr. )
1. Step 1. For Group 0, the safety seat must only be used in the most
reclined Position .(see Fig. 1/a). The safety seat must never be used in
any other position (Fig. 1/b). To adjust the reclining position of the
safety seat, pull the red handle (J) forward until the most recline forward
position. Take off the Basic wedge and change the position as the
picture position, then press it inside with a “click”. The Basic wedge must
be in position B when used rearward facing(Fig.2).