juju Complete 360, Руководство пользователя

Страница: 14 / 61

Group 0+ Installation method
Installation of chair's ISOFIX system
Choose the appropriate installation mode
(according to the child's weight to choose the installation mode)
ISOFIX
C1. Press the ISOFIX release button at the bottom of the seat and push the ISOFIX
connector back as hard as possible.
C2. Push the ISOFIX connector into the anchor point of the vehicle, meanwhile
hear two "click" sounds.
C3. When the ISOFIX adjustment button is green, indicating that the seat is
installed in place. If it is red, please follow the above steps to install it again.
C4. Push the seat back until it get close to the vehicle seat. Shake the seat to check
whether the seat is jammed or not, if the seat is swaying, or the ISOFIX connector
is loose, please follow the above steps to install again.
In accordance with the European standard < ECE R44 / 04 >, the safety seat is
divided into four groups.
Please select the installation method of the
group corresponding to the
children's instant weight in combination with the children's situation.
See picture D.
Groups I, II, and III must be installed with ISOFI X and vehicle seat
belts. Do not only use vehicle seat belts! Do not use the top tether.
First of all, please check if there are ISOFIX fasteners at the intersection
between the backrest and the seat of the vehicle and if there is a Top Tether
anchorage. Please read your vehicle user's manual carefully, or contact your
vehicle manufacturer.
Some cloth covers of car seats are sensitive (e.g. velvet, leather, etc.) which may
have wear trace after long-term use of child safety seats, so it is recommended
to have a blanket or towel cover the vehicle seat when using your safety seats.
Page 14