To charge, connect the wall charger to the Magic Power’s DC
port. When charging, the charge symbol (
) will appear on the dis-
play and the charge percentage will slowly rise. The battery takes
about two hours to reach full charge from 1%. The Magic Power
can also be charged via a Micro USB cable. This charging method
can take several hours, however.
The included quick release mount can be attached to the camera
or any accessory with a standard 1/4-20 insert, present on virtually
all camera cages and most other camera mounting accessories.
For frequent relocation of the Magic Power, we recommend the
use of an adjustable camera clamp, which can be easily attached
to rail rods, tripods, monopods, etc.
To attach the Magic Power to the quick release mount, simply slide
the Magic Power’s quick release plate, located on the back of
the battery, onto the quick release mount and secure it by locking
the red tab in the upward position. To release, slide the red tab
downward.
Setup
Slide downward into mount
Lock
Unlock
Fasten to camera,
cage or other accessory
NOTE:
It is highly recommended that the Magic Power 2.0 battery
be fully charged before being stored for an extended period of
time. Because this battery has active USB ports, storing the battery
at a low charge for several weeks or more can completely drain
and damage the internal battery cells.
2
