when using RS232 the light will blink slowly indicating the unit is powered up.
POD LEDs - As each of the POD duplex receptacles on the back of the iP1520
turns on a corresponding LED on the front of the unit will light. Each LED will
turn off when the POD turns off.
BACK PANEL FEATURES
NETWORK (Ethernet) PORT - This RJ45 connector is for connecting to your
PC, router or local area network using a TCP/IP link.
RS232 PORT- This RJ11 connector can be used for remote control of the
iP1520 via RS232 protocol over distances not to exceed 50 feet.
PODs 1 -3 - There are three duplex receptacles on the back of the iP1520.
Each is rated for a maximum twenty amp load and each is controllable to turn
on or off independently of the others. When the on board sequencing process is
used POD 1 will turn on first, followed in order by POD 2 and POD 3. They will
turn of in reverse order using this same process.
UNSWITCHED OUTLET - This single outlet is rated for a maximum load of
twenty amps. It will have power any time the iP1520 is plugged into a live AC
receptacle
.
Page 4
