SAFETY INSTRUCTIONS
INSTALLATION AND BATTERY CHARGE
WIFI CONNECTION
All handling and safety instructions should be read and followed before using the product.
Please note:
1.- Supervise closely the use of children, people with disability or if any of them is around.
2.- If the product is used to share content on the internet such as social networking pages, it
must be supervised by an adult.
3. Use this product only for its intended use as described in this manual.
4. Place the device away from direct sunlight or heat sources such as radiators, stoves, etc.
General precautions:
• Suitable for 14+.
• Keep VideoHummer James Bond away from the your face, eyes and hair every instant. Keep
fingers away from the wheels while they are working.
• Be sure that there are no obstacles or breakable objects on the path of VideoHummer James
Bond.
• Do not leave the VideoHummer James Bond fall, spray or dive in water.
1. Car battery Placement:
Remove the battery cover on the bottom of the car, unscrewing the screw and plug the battery
into the battery compartment. Place the battery cover and the screw it (see Figure 1).
2. Charging the battery: Remove the battery from the bottom of the car, connected it with the
charger and start charging it (see Figure 2). The charging process lasts approximately 4 hours.
Ensure to unplug the charger when the battery is full charged.
Starting the car (see Figure 3), open your mobile or tablet in your wireless connections page to
seek "rc_copter" (each R / C Video Hummer car has a different suffix to differentiate them) and
the connecte it (see figure 4).
Figure 1.
Figura 3.
Figure 2.
Figura 4.
-1-
Notice:
This product may contain small parts that can cause asphyxiation if swallowed.
